Model Forum / General / Models / February 2007

any suggestions?
Thanks
Sam

I keep seeing after market parts.
Like wing folds etc.
Where would I find these objects?
Thanks

I bought a 20" faceplate in an internet auction, collected it last
week. I was misinformed about the size of camlock fitting, I wanted
D1-8 but this is D1-11.
Just posting this here in case anyone is crying out for a D1-11

goes for $77.  yikes!!!!!!!!
http://www.militaryhobbies.com/product.cfm?ProductID=8224

Can anyone point me to a steel stockholder for 10mm square (1mm wall)
Stainless Steel Tube?
This is for decorative rather than structural use so the technical specs
are somewhat irrelevant.

just found the Revell 110 night fighter version.  Is there an
aftermarket nose with guns for this thing  or could I just leave off
those pesky attennae bits????
thx - Craig

First and Farmost.... HAPPY 2007 to everyone,
Hello! have any member have tried to conert a simple milling machine in
to cnc milling, if so can he share his experience with me. Thanks &
regards

well so much for thinking about slowing down the kit
purchases...
Craig
http://www.cybermodeler.com/special/2007_releases.shtml

I need to make one of my floor standing pillar drills considerably taller
for a special long running job. What sort of "Tube" is used? I know its
steel, I know its 2 3/4" diameter, but its not ERW. The surface finish is
above the average stock material.Unlikely I would think to ...

I have a question, truly not a rant, so please don't take it as such.
I build mostly 1/48 and 1/32 a/c.  Sometimes I include the smallest fishing
leader I can as an antenna wire, sometimes I don't.  I  am always gigged at
contests when I don't have antenna wire.

Something made me go "Hmm. I wonder." Yesterday, while
tinkering on my late dad's (now my) '69 Ford Bronco, & also finding
out before that a lot of Bronco parts are also '60s-ish Mustang parts,
it occurred to me that NAA also built both a Mustang (P-51, of course)

My lathe has several oiler points, these are like small round flush
brass inserts with a small spring-loaded ball inside. They appear to
have used a couple of different sizes for some obscure reason.
I've never seemed to have much success using them, as although I have

Specifically, WWII Warships.
I'm looking for a source for large-scale kits or parts suppliers
for a Northampton-class Heavy Cruiser and a Pennsylvania-class
Battleship.

Book Review: T-34: Mythical Weapon by Robert Michulec and Miroslaw
Zientarzewski; English Language Version published by Air Connection,
Mississauga, Ontario, Canada 2006 (http://www.airconnection.on.ca) in
conjunction with Armageddon Books (ISBN 0-9781091-0-4); 520 pp. with

Dapatkan cara mudah menembus togel 2/3/4  angka, Mau tahu
rahasianya?... silahkan lihat saja di http://www.mustikaladuni.com
Dijamin no togel yg anda pasang akan
Tembus dan Sering Gol...