Model Forum / General / Models / March 2007

I found a die grinder in the toyshop the other day. It was made by
Georges Renault (now part of Chicago Pneumatic, apparently) and is
marked K30_S:_D.
It's got a couple of parts I don't understand - can anyone here help me out ?

Hi you search a casting, its easy go to http://www.castingshow.com or
http://www.casting.fr
Last casting Calles
Film & photography project seeks stylist.

someone replied to my posts in regards to models and collecting
Disney. I seem to have lost Internet Explorer and with it all my email
and bookmarks.
If you know who you are, please reply as I never got the chance to

Like it says, Master Grade kits, mostly built.  By "mostly" this
means minor details have not been installed (visors, logos, no
stickers) and no seams have been glued.  A few have been puttied and
sanded but you could easily undo them.

A Kress woodworking router may seem off topic at first, but the subject is
relevant. I am looking for ideas to ease the removal of the collet which
jams in the holder so tightly that I have to tap it out with a hammer on a
drift behind the edge. This is even after extracting the ...

I have to go and pick up my new toy next Tuesday, and I've hired a van
to get it.  I'll be travelling from Coalville, Leicestershire to
Poole, Dorset in the morning with an empty 3.5t van with 1/2t tail
lift.  Once I'm loaded up I'll be travelling back, with only one

I have always wanted to turn 1/32 Trumpeter A-10 into one of the
prototype planes. I lived at Edwards from 1975 to 1979. My father ran
the weapons shop for YF-16. Thank you

Hi Walt, I emailed you back, but it bounced.
I looked through my decal stash for 5/16" checks, either blue/clear or
yellow/clear. I don't have anything that large at all. I have some
black/clear, white/clear that are 1/4" and some yellow/clear that are

which are better, fast frames or ez mask?
fast frames look easier, a lot easier.

Have just posted all the Frog kits on my disposal list at reduced
starting  prices, relisted two Airfix kits that didn't sell last time
(with better pics), and a couple of Novo versions of Frog kits.  All
auctions end Sunday 25 March.  You can see here:

I had a hard time believing this myself...but it seems a young female
co-worker of mine was out with her hubby and a few folk last weekend
playing with a collection of MGs...
They had just put a few single rounds through a WWII vintage Browning M2

. . anyone seen any instore beside the 109F?

What's the difference between oil guns & grease guns.  Or, put another
way, what's to stop me taking the grease out of my tecalamit pump
grease gun and filling it with oil to oil the ways on my milling
machine?  Come to think of it how would I know if it was an oil or

i saw a quicky pic on the history channel of a 111 with the
big radar antenna coming out of the canopy. anyone have or
no of a photo? i saw that and knew i must build. it was the
big fug, i think it is, not the little arrow ones. hohentile

http://www.squadron.com/ItemDetails.asp?item=ACMT3511
Was just looking at Squadron and this was in the Presell category.
Heck, you would have to build a room just to house it!!
Lance