Model Forum / General / Models / March 2007

Seems the 1/2" x 18 thread has been dealt with so how about this one?
Downfeed adjustable stop on my mill/drill is 1/2" x 20 TPI.
Stop nuts look like normal thin hex nuts and are plated.
Henry

I believe this kit was made by Revell or revell of Germany. It is the
one with the cannon nose. If you know of one or where to search for
one I would apprecaite any leads.
Thanks.

Picked it up this morning, it is now at the new factory awaiting collection at
your convenience.
John certainly gives good measure, I asked for 'about 8ft' and this one is 9' 6"
long.

I have Googled in vain to find out whether it is possible to easily buy
reasonably large (say 1m x 0.5m) sheets of glassfibre material 0.8mm or 1mm
thick without any copper cladding.
I want to make some A1 sized portfolio cases for keeping drawings and

Buat anda yang hobby ataupun ingin dapat uang dari togel 3 ANGKA
PASTI, dapatkan cara mendapatkan no togel dengan gampang! Anda mau
tahu caranya?...Biar anda tak penasaran silahkan lihat aja caranya di:
http://www.mustikaladuni.com Dijamin hari-hari kamu akan selalu

One of the things I make calls for an approx. 30mm half round cut into the
end of a piece of approx 38mm tube, so as to mount a smaller tube across the
end, more or less in a T shape.  The 38mm tube is about 1.2mm wall or less,
high quality seamless cro-mo cycle tube and thus quite ...

I had 8 off 15mm holes to drill in a 1.125" thick disc of mild steel
on an 80 mm PCD. I have a 4" chuck mounted on my 6" Vertex rotary
table and there was a 60mm recess in the back of my disc so the chuck
was wound out to grip. The whole plot is mounted on the Bridge port,

I've had enough of Onetel, the sevice has gone from ordinary to
completely diabolical over the last couple of months, email has been
off yet again since yesterday evening yet their 'status phone line' is
reporting that all is wonderful and nobody answers the support phone.

I'm building an Airfix 1/48 Seafire FR47.
Well...  "building" isn't really the correct word.  I'm currently destroying
it...   I intended to put an Aires resin cockpit in it. The Aires parts are
beautifully detailed and look absolutely superb when they are painted up.

Got to do a small repair for an old lady that lives up the road, which
involves making a new ferrule to fit into the arm of a magnifying
light. Current part is a zinc casting where the internal thread has
stripped off.

anyone have the decal sheet they can sell or trade?
or a 3rd party sheet with some interesting noseart?
and are there any comments about the kit?i understand the 2
tail types but why is the nose split off and seperate? seems

Anyone have a use for a free pen plotter?
Hewlett Packard 7550A, takes up to A3 paper, 8-pen carousel, mains powered,
serial I/O port.
Somewhere we have an HP reprint of the manual for it.

Does anyone make a kit of this aircraft?

If I want to pose a Bergpanther towing a disabled Panther that had
slipped down an embarkment where will the tow cable be attached to on
the Bergpanther and on the disabled  Panther?  A single tow cable
attached to one of the two tow links on the front corner of a Panther

I am just at the end of a small tin of blue (the type you smear onto
master to determine high spots when rubbed over something to b
scraped) I have had this about 40 years, is something similar stil
available ? Davi