Model Forum / General / Models / April 2008

With "factory defaults" the highest frequency this will allow me to set
is 60Hz and I can't find how to change it. On other inverter
manufacturer's I've played with its been fairly easy to find the right
parameter, but not this one.

I have mis placed my instructions. I would like to know if some one
will send me a copy. Thanks in advance.
Dan Beavers
modelar7@aol.com

I'm struggling to find an online source for lengths of about 6mm sided
square cross section wood.
It just needs to be strong enough to build a box frame for tacking warped
3mm plywood to.

You know, the black kind that you put into the ends of bits of box-section
when molishing e.g. a garden gate or suchlike, to fill up the hole in a tidy
manner.
whence?

Hello. Can anyone give me the dimensions for INT 30 and 40 tapers s
that I can identify what I have. Cheer
--
Nouris

i was given the dragon henshel zemmerit king tiger. that is a pretty amazing
kit and i'm impressed with state of the art.....but, it has schemes and decals
for 1945 tanks with that zimmerit. was this accurate? were those survivors
from pre-mid 44?

What sort of surfaces are best for steel/bronze bearings?
I thought to polish the steel shaft as high as I can (shiny!), but leave
the bronze bearings as-bored, ie a little groovy. The bearings compress,
so after wearing in I can adjust them back.

need a propeller for monogram 1/72 tigercat.. anybody can help?
hanks
jose

I have recently become the proud owner of a Clarkson Mk1 cutter
grinder.  It is in good shape but was very dirty.  I have successfully
cleaned it up but would like some advice on lubrication.
When I dismantled it all the slides were lubricated with grease.

This NG is drowning in spam lately.
As the spammers use different adresses all the time it's no use killfiling
them.
Anyone got any sugestions to get rid of this spam? I use XNews.

I have dismantled a cold store room (30' x 9') that was insulated with
3" thick slabs of expanded polystyrene glued into wooden frames. So if
anyone wants / needs several hundred square foot of 3" insulation they
may willingly have it if they can collect fairly quickly to save it

I have blocked the sender http://groups.google.com and also an auto-delete
on posts with 'WATCH' in the title.
This has cleared most but I still get the old few which have
http:/groups.google.com as the organization.

For those interested I've posted on alt.binaries.models.scale quite a few
pictures covering the club stands & competition models from this weekends
2008 Scottish Nationals from Perth.
Hope everyone enjoys them & it was a very good weekend, also managed to

We are trying to fix a few niggles on an old Onan water-cooled generator, and
one of the last jobs is sorting out the drain tap.
When we got it, there was a bolt stuffed up inside the radiator drain tube
extension, but it should have a drain tap in there.

Is anybody able to provide transport for something from the Harrogate
show down to London/Essex/Suffolk?
The item is about 14"x14"x18" and weighs 20-30kg (nice use of mixed
units there).