Model Forum / General / Railroads / February 2008

What scale are these please (I know they're marketed for N-gauge) but they
seem very small when compared with other British 1/148th scale structures?
Have Hornby produced them to the European standard of 1/160th scale?
John.

I have a 7x12 minilathe and a nicely hand-ground Acme profile tool
I made. Right, so I have to cut a worm at 6.4 tpi for Dave Lammas'
dividing head, the change gears with my 16 tpi leadscrew will be:
 (30/50) x (40/60)

Hi Peter,
Can you let me have your email address please?  I'll pass Peco's response
about faulty point work to you if you do.

Angles and plates with molded rivet detail on them - for making plate girder
and truss bridges, and similar projects.
Sheet styrene with to simulate cast-in-place concrete with, a lightly
embossed pattern suggesting individual boards used for the concrete forms.

Can anyone recommend DCC fitting service in the South East of the UK, or
engines which are not DCC ready?
Thanks in anticipation.
PETER

How did the prototypes use the dual headlights on F units? Which of
the special effects in DCC decoders are most realistic?

nike jordan 1-23 sneakers wholesale ( WWW.NikeChinaWholesale.Com )
We Wholesale Cheap Jordan Shoes,Michael Jordan Shoes,Nike Jordan
Basketball shoes, ... Jordan Shoes,Air Jordan Sneakers,Air Jordan
Wholesale All of the Air Jordan sneakers have Nike Air in the

I noted in the March 2008 edition of 'Model Rail' the subscription
offer included a 'free' spray gun 'worth' £20.  Half the description
was missing but it looks like you get the gun plus two jars in the
offer.  The gun itself only goes down to 3 mm so is not very fine.

newsbiscuit.com
24th February 2008
"  For the first time there are now more people smoking crack pipes
than traditional tobacco pipes, with almost no overlap between the two

Anyone done any?
Mine is stretch a Lima 50 bogies to scale size with cast sides, brass strip
and some spare gears

Hello. I would appreciate some advice on building a layout for N
scale. I already have the 4x8 ply framed and mounted at 42" high, but
now I'm a bit confused. Should I use another 4x8  foam or similar on
top of the plywood as the layout base?

Bromsgrove Advertiser
" ......... a novice or avid collector those interested in collectable
toys are in for a treat at The Toy Collectors Fair on Sunday at The
NEC. "

you realize that your a cocksucker, right?

See how to make an operating (I wish) train order rack and how to use it. If
I could get the engineer to stick his arm out the window and grab it on the
fly, I would. See my compromise at;   http://www.rrscenery.com
Phil Anderson

I have 3 N scale  Bachman Santa Fe Diesel  Engines and I'd like to
use them but they all make the same noise, like a sewing machine, too
loud compared to my other engines. Is there a trick to reduce this
noise? It seems characteristic of this brand and model since all 3