Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / General / Rockets / April 2004



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Low Current E-MATCHES24 Apr 2004 05:21 GMT4
Guys,
I need to get ahold of some low current E-MATCHES. If you know a
source for these could you point me into the right direction. It seems
that Daveyfire is in limbo right now and OXRAL wants you to buy a
15Lb thrust N20/Ethane motor24 Apr 2004 04:22 GMT1
cool when can I have one?
http://www.xcor.com/gallery/15lb
66Newtons? an F engine?
shockie B)
Picture of Skippy found!24 Apr 2004 03:13 GMT34
http://reidsco.com/images/11694.jpg
Picture wire as a shock cord mount24 Apr 2004 00:51 GMT9
I went to micheals today and bought some light picture hanging wire ( used
for lighetr pictures & frames), i intend on using this as a shock cord mount
in a model rocket...this rocket would at HIGHEST eject the parachute at
around 30 fps....I can, with a good amount of effort, break ...
2003 RMR flight survey Final Results24 Apr 2004 00:19 GMT1
Were the 2003 flight survey results ever posted?
new member23 Apr 2004 22:47 GMT2
Hi my name is Tony Semenuk and i livein the UP  in MichiganI've been into rockets  about twenty five yearsand I wasa wondering where the nearest clubs are {if any} mainly central UP I moved up here from detroit three years agoand am finaly settling in,yhere is a large field on my ...
MDRA Central Sod Launch 23 Apr 2004 19:25 GMT4
 The next MDRA launch's Sunday (May 2) coincides with the  Chesapeake Bay
Bridge Walk, when they close the one of the bridges over the Chesapeake Bridge
to traffic & open it to pedestrians. The other bridge handles (poorly) vehicles
in both directions & traffic & back-ups will be ...
What caused the cato?23 Apr 2004 18:35 GMT10
I had an Aerotech G35-4W cato on the pad last month at the NEFAR launch.
The nozzle end of the motor blew off taking out part of the tail-end of my
Astrobee-D.  When I recovered the pieces I discovered that the propellant
grain was intact and looked like it hadn't burned.  I've ...
Protecting parachutes23 Apr 2004 02:56 GMT18
  I sent up a homemade rocket with a Teleflite G-75 motor and put plenty of
wadding but my nylon chute still melted. Is there a way to better protect my
chutes?
Who's Who of Rocketry: Skippy Irvine?23 Apr 2004 00:55 GMT10
OK I'll ask:
Who exactly is Skippy Irvine?
TED
That's One Out Of the Way22 Apr 2004 22:14 GMT49
Today I made my first certification - NAR L1
PML MiniBBX
24" chute with a 4" spill
Railbuttons launch guidance
Launch Report METRA April 17 and 1822 Apr 2004 22:10 GMT1
The Metropolitan Rocketry Association, Tripoli Prefecture #94 held its first
commercial launch of the year Saturday and Sunday (April 17 & 18) at our
spacious range located on a sod farm near Wawayanda, NY (about 40 miles NW
of NYC). In addition to our New York / New Jersey core, we ...
ROL NEWS--RCS IERT Course Deemed a "Defense Article"22 Apr 2004 16:45 GMT30
RCS IERT Course Deemed a "Defense Article"
April 20, 2004
Web posted at: 12:54 PM EDT
(ROL Newswire) --  The United States Department of State has determined
Jerry will now be known as Skippy.22 Apr 2004 10:07 GMT10
So many people get angry when they read or hear the name that I
thought a change might make the climate around here a bit more calm.
So if everyone could use Skippy instead of Jerry from now on it would
be greatly appreciated.
Rocksim .ENG Files for AMW 54-140021 Apr 2004 22:29 GMT7
Anyone have these or know where I can find them?
Thanks.
Signature

Bill Wehner

Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 March, 2004
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.