Home | Contact Us | FAQ | Search & Site Map | Link to Us
Sign In | Join | Other 45 Sites in Network
Home
Discussion Groups
General
ModelsRailroadsRockets
Radio Controlled
Air ModelsHelicoptersLand ModelsWater Models
ModelGeeks.com
Contact UsLink To UsSearch & Site Map

Model Forum / General / Rockets / December 2005



Tip: Looking for answers? Try searching our database.

ThreadLast Post  Replies
Looking for some old builders31 Dec 2005 01:31 GMT3
Does anyone know the Whereabouts of Eric Lohr, Eric Russell, Bret Corp or
Dan Gazzaniga? Dan produced the famous 1977 Estes Shatner video and the
others mentioned actually build the models used..including the scissor wing
glider that Shatner launches prematurely at the end of the ...
Estes (Cox) X-15 Available again30 Dec 2005 13:09 GMT5
 I was just at the local hobby shop and was surprised to see the old
Cox X-15 has been released by Estes and was only running about $15.
With a minor internal mod, my old Cox X-15 is about the best flying
model rocket I've ever flown. And it's nearly indestructible.
Dried out old sanding sealer30 Dec 2005 02:13 GMT4
Been doing some serious cleaning in the workshop and I came across some
old Sig butyrate sanding sealer that has solidified.  Is it a total lost
or is there some way I can salvage it with some acetone or similar?
Ted Novak
GOT MAGAZINE?29 Dec 2005 22:39 GMT27
http://abcnews.go.com/GMA/story?id=1424214
Aeropac - Help! Not sure what I need???29 Dec 2005 03:31 GMT3
Hiyas,
I have a LOC Expediter and I decided I would buy an Aeropac retainer.
This kit has a single 54mm mount but I will only ever fly it on 38mm
motors. I have a LOC 54/38 adapter. I have not expoxied the aft CR
spin vanes in the flow of nozzle gases.28 Dec 2005 01:32 GMT27
I want to try this but I would like to know what temperatures I would
get at the nozzle of a G size BP engine. I might need a tungsten alloy.
And yes.. Santa *Is* real... Just ask NORAD!27 Dec 2005 21:03 GMT3
Better be good folks!  He's on the move!
http://www.noradtrackssanta.com/en/default.php
<vbg>
Tod "Merry Christmas!" Hilty
ATF status report27 Dec 2005 00:35 GMT3
The ATF submitted yet another status report to the court just before the
15 December 2005 status hearing. You can read it here:
http://home.earthlink.net/~schultdw/regulation/BATFE%2012-9-05%20status%20report.pdf
According to this report, the ATF submitted a draft version of the ...
Merry Christmas to all...26 Dec 2005 01:07 GMT5
At 23:18 EST on Christmas Eve:
Merry Christmas to all....
You guys are the best bunch to hang around with online, regardless of
your quirks.... I wouldn't trade ya'all for the world....
Hobby Lobby Sale!25 Dec 2005 17:44 GMT1
ALL rocket kits and starter sets 1/2 off until Dec. 31st.  Rocket engines NOT included.
Les
Fun with Thermite25 Dec 2005 14:16 GMT15
Ya gotta love these guys.
http://media.putfile.com/thermitef
Signature

R. J. Talley

Nasa-Vatican partnership :   Senasa has legislated for second moon landing myth24 Dec 2005 08:01 GMT4
Updated: 4:12 p.m. ET Dec. 22, 2005
WASHINGTON - The Senate early Thursday approved legislation
............
Bush has ........... eventual bid to return humans to the moon. While
Aerotech 24mm X 96mm RMS?24 Dec 2005 01:11 GMT4
  Anyone know if Aerotech is considering an RMS system
based on this size?  Reason I ask is I had a large model
that flew fine to about 900' on the F21-6 but eventually
crashed when
(PR) Recovery Technologies will be closed until January 9, 200623 Dec 2005 20:44 GMT2
Recovery Technologies will be closed until January 9, 2006 to celebrate the
Christmas Holiday and to grieve the loss of family members.
We lost Dave's Uncle Bob on Oct 31, my brother-in-law Michael on Dec 1, and
my mom this morning.
As the keeper of that which is released only once per annum...22 Dec 2005 16:04 GMT5
Good thing, too...
<g>
"At this festive time Mr. Scrooge said the gentleman taking up a pen.
It is more than usually desirable that we should make some slight
Pages: 1 2 3 4 November, 2005
 
Sign In
Join
My Latest Posts
My Monitored Threads
My Blog
My Photo Gallery
My Profile
My Homepage

Start New Thread



©2008 Advenet LLC   Privacy Policy - Terms of Use
This website includes both content owned or controlled by Advenet as well as content owned or controlled by third parties.