Model Forum / Radio Controlled / Water Models / August 2004

I am building a scale model sport fishing boat and would like to kno
where I can get teak strips in 1/4 x 1/16 and at least 20 inches long.
Also, how to install it so it looks like it has the caulking betwee
the boards

I have 2 deep v boat hulls for sale:
http://cgi6.ebay.com/ws/eBayISAPI.dll?ViewSellersOtherItems&userid=leo_home&
include=0&since=-1&sort=3&rows=50

I'm pulling an old electric model out of retirement.  It's the Dumas 40 foot
Coast Guard utility boat.  It currently has a pair of Robbe 600's (I think,
may be 700's or even 500's) can type motors with 3/1 gear boxes.  Current
speed control is the old Ace unit rated at 80 amps.

I have a R/C hovercraft and I got a NiCd (8x)AA 700 mAh 9.6V battery pack
when I bought it.
The problem is that the power only lasts for about 5 minutes...
- is it possible to use a more powerful battery pack?

Limited quantity of carbon fibre (woven and uni), Kevlar and fibre glass for
sale on a first come first served basis
Small quantities and offcut available. very good prices.
Please reply via email and i'll see what i can do to help you..

Im looking for a retailer for a Mabushi RS-550PH or direct replacement.
Anyone know of one?
Thanks-

Ok, so here's what I've been tasked to do
Build a system to produce smooth sinusoidal oscillations with a
variable stroke of up to 8" and variable frequency up to 30hz. The
driver required will be around 3 hp.

Have a very old plan, and I wish to build this model again.
Problem is I do not have all of the plan.
The plan is of the Ragtime, a model 1M yacht featured in the Marine
Modelling World Wide Plans Service, (MMWWPS), books many years ago.