Model Forum / Radio Controlled / Water Models / October 2007

Check out the new Almost Ready to Run electric catamaran from Mini Cat
Racing USA!
www.minicatracingusa.com

Hi All  Can any one tell me how I can scale down the plans for the 72
inch offshore mono to 48 to 54 inch. Thank you.

I'm trying to get a soft plastic tube run through the polyethylene(?)
cork of a soda bottle.
The problem is that I cannot find a way to make the seal watertight.
I've tried hot glue and different epoxy glues but at some point they

Does anyone have the actual dimensions of the 72" boat plans?

have just finished building the hull for 'wild thing'. can anyone
recommend what to use to seal the hull and also what type of paint to
use ?
thanks..

hi guys im new to rc boating, iv just built my first frame. It is 80cm
long and 20 cm wide. its made out of balsa wood and has a fiberglassed
hull, and the hull is farly shallow from the back then comes narrow.
the bow has been foam filled and sealed tight. its is pritty heavy as

Hi I am new to the forum new into RC boats. I have a Ryobi 31cc 725rE
trimmer edger that I wont to use in some sort of boat, Can I use this
motor? the exhaust and carb both come out of the back side of the
motor, and can I get a cooling cap that will work on this motor?

What sort of boat do you have?
Try www.rcjets.com.au

I'm looking for some catamaram plans like "Miss Geico" or " Budweiser
select"
around 45" long, to use with a Zenoha 26.

Hi Everybody :)
This is a great forum :) I am from Australia and it is not common place
to have tug boats on the lakes here, but I am looking a building one
from the hull up. I noticed that there is a great plan on the download

Plank on Frame Models and Scale Masting & Rigging by Harold A
Underhill,Volume 1 and 2 ,VGC First editions,vol1 1958(157 pages plus
plan section) ,vol 2 1960( 144 pages plus plan section).Large format.
Two superb first edition copies of THE books on the subject.Volume 1

I am thinking of playing with hydrofoils just to see what
can be done.  I'll probably use an outrunner equivalent to a
.40 and a surface drive. I'm not sure how large a hull will
be needed.  nor do I have a clue as to the size of the foils